Parkinson Technologies

Advantage Series

Cantilevered Center Slitter Rewinder

The Advantage Series of high performance, cantilevered center slitter rewinder are used in many different applications throughout a wide range of industries. The general purpose of these machines is to economically slit and rewind a variety of materials that may be non-uniform in thickness or sensitive to contact pressure. The Advantage Series slitter machine can be configured with multiple types of slitting systems; including score, shear, and razor to accommodate diverse applications. These slitter machines can also be equipped with individual or common top riding rollers allowing for high speed slitting and rewinding.

Maximum Web WidthMaximum Rewind DiameterMaximum Speed
835-2472 inches

(1828 mm)

24 inches
(610 mm)

2000 fpm

(610 mpm)

835-3072 inches

(1828 mm)

30 inches

(762 mm)

2000 fpm

(610 mpm)

93572 inches

(1828 mm)

32 inches

(813 mm)

2000 fpm

(610 mpm)

103590 inches

(2286 mm)

32 inches

(813 mm)

2000 fpm

(610 mpm)

33590 inches

(2286 mm)

32 inches
(813 mm)

2500 fpm

(762 mpm)

Options

Cantilevered Center Slitter Rewinder Options
985 Trim Handling System
985 Trim Handling System

Dusenbery 985 Series Trim Handling Systems outperform conventional systems due to their unique 45º Venturi profile. The substantial increase in air velocity and static pressure provides more efficient trim removal.

Air Differential Shaft
Air Differential Shaft

Air differential shafts allow you to convert larger diameter rolls at lower tensions. These shafts produce and maintain precise individual control over multiple winding packages.

Lift Out Feature
Lift Out Feature

Lift-out capability for differential and lock-core rewinding is an added plus to the machine. Available in the lower rewind position or both positions (requires additional motor drive), provides maximum versatility.

Roll Pushers
Roll Pushers

Linear actuated roll pushers enable the operator to remove the finished rewind packages without repetitive physical force, and are automatically operated from the machine PLC. Various core sizes can be accommodated

Unloader
Unloader

Designed to unload finished rewind packages from cantilevered rewind mandrels, the 413 unloader rotates manually away from the mandrels in a vertical plane (180o total rotation) and then automatically pivots to the horizontal plane for ease of unloading. Model 412 is a standard vertical plane unloader.

  • Model 835 Cantilevered Center Slitter Rewinder
    Model 835 Cantilevered Center Slitter Rewinder

    The model 835 is constructed in two versions, with either 24” OD or 30” OD rewind capability. Quick set up times, fast unloading and numerous configuration options provide for the highest productivity available.

  • Model 935 Cantilevered Center Slitter Rewinder
    Model 935 Cantilevered Center Slitter Rewinder

    The Model 935 shares the same feature rich options of the Model 835 with the addition of the pivoting top riding roll system that allows for both contact and minimum gap rewinding.

  • Model 1035 Cantilevered Center Slitter Rewinder
    Model 1035 Cantilevered Center Slitter Rewinder

    The Model 1035 also shares the msame feature rich options of the Model 835 & 935 with the ability to handle a maximum width as large as 90 inches. The 1035 is equipped with mretracting center to support mlarger rewind diameters and mwider web widths.

  • Model 335 Duplex Turreting Center Slitter Rewinder
    Model 335 Duplex Turreting Center Slitter Rewinder

    The Advantage Series’ 335 Duplex Turreting Center Slitter Rewinder’s cantilevered rewind shafts offer fast finished roll removal and easier core placement. Its duplex turret design with automatic transfer provides increased productivity over the traditional cantilevered machines.